How To Remove Back Seat Honda Civic 2017

I needed to remove my full back seat (bench and seat backs) in club to fit/build a bed into my motorcar. Looking online I got an thought of what I was working with but I didn't see anything that told the whole story. I have a 2022 EX-T with a 60/40 carve up seat dorsum that lays down.

nd9vArK2RbGERJDY3Qe8nA

Removing the seat is pretty uncomplicated and all parts and pieces are lightweight. You'll need a 10mm and 12mm socket wrench, and a baggie to collect the bolts equally you remove them.

Gear up by giving yourself plenty of space on both sides of the automobile to have the doors open. Release both seat backs by pulling the leaver in the trunk and laying downwardly the seats. I pushed both front seats all the style forward to requite myself plenty of wiggle room within the car

First, remove the seat backs:

Working outset on the passenger side, flip upward the 2 little piece of felt at the bottom left and right corner of the seat back to expose the bolts to be removed using the socket wrench (ane on door side, 2 at the center seat line). Pull the seat forward out of the brackets and ta-da! 40% of the seat back is removed!
Move to the drivers side, flip upward the felt on on the bottom by the door and removed the commodities.
Back on the passenger side you lot will encounter a bolt running perpendicular to the other bolts y'all merely removed into the side of the 60% seat.

Remove this bolt with the socket wrench, which will also free the subclass that was holding the 40% side of the seat. Pull the seat forrad out of the brackets and it is free for storing.
This commodities is different than what i saw online for whatever other Honda seat removal instruction.

2nd, remove the bench.

This can be done without removing the seat backs, I establish information technology easier to exercise second since I was removing both.

Looking towards the trunk at the back of the seat behind the drivers side, there is a U bracket with a bolt in it belongings the seat in identify. Remove this bolt. If you are not removing seat backs – you tin still do this step past sliding your hand between bench and seat back to locate the commodities and using an extension on your socket wrench to remove the bolt.

4Ee3v+YjT%K1OqKBkMJ8Yg

In 2x locations under the back seat, one-ii ft from the door on either side, at that place is a prune holding the seat in place. Run your mitt under the bench seat to locate them. Working on one at a time, pinch and pull forrard on the clip to release the seat. It may help to push button the seat down as you pull forward, and so release the down pressure in one case the clip is forwards.

p6BxrQPzRGSeUQeLiHrf0w

There you go! The total back seat is removed.

A few tips for when you put everything back in place:

Reinstall in the reverse order of removal (seat bench, 60% side, 40% side)
Pull into place the the seatbelt buckles and middle seatbelt natural language before fastening the bench into place
Make sure the center seatbelt is in the proper place before bolting in the sixty% side of the seat back